Grammercy Coffee Cabinetry
$20.00Price
Excluding Sales Tax
Order a Sample Door
Description:
| Style: | Recessed |
| Face Frame: | 3/4" x 2" mortise and tenon, solid wood |
| Door Frame: | 3/4" x 2-1/4" mortise and tenon, solid birch |
| Door Center: | MDF center panel |
| Sides: | 1/2" veneered plywood sides, grooved into face frame |
| Top & Bottom (Wall): | 1/2" thick birch veneered plywood |
| Bottom (Base): | 1/2" thick veneered plywood |
| Back Panel: | 1/2" thick veneered plywood |
| Shelves: | 3/4" birch veneered plywood with matching edge banding, plastic self-locking shelf clips |
| Base Cabinet Shelf Depth: | 11-7/8" (tall cabinets are 18") |
| Drawer Front: | 5-pc recessed panel |
| Drawer Box: | 5/8" solid birch, dovetailed drawer box with 3/8" plywood bottom |
| Drawer Glides: | Blumotion, undermount, soft close |
| Base Corner Supports: | 2-1/2" x 2-1/2" plywood beam fastened to top of base cabinets to ensure a straight, integrated side and additional countertop support |
| Overlay: | Traditional/Partial |
| Hinges: | BLUM 6-way adjustable, concealed, soft-close, opens 110 |
| Cabinet Interior: | Natural finish |
| Center Stile: |
None unless noted in cabinet description |
| Assembly Method: | Ships pre-assembled, dovetailed, glued, stapled, screwed |
| Finish: | Sherwin Williams paint with a catalytic conversion top coat |
| Toe Kick: | 3/4" x 4-1/2" select veneered plywood *toe kick area will be a natural finish, 8' toe kicks are required for base, oven, pantry and vanity cabinets |
| Installation Rail: | 1/2" full back so a specific rail isn't needed |
| CARB Compliant: | Yes |
| Door Hinges: | Please use drop down options for each cabinet to change hinging from right to left. Doors can also be flipped to change hinging after deliver, if needed. |
| Side Panels Finished: | No (side will be unfinished plywood, for exposed sides, be sure to add the finished side option, when selected, the matching side will also be flush with the side of the cabinet). |
| Installation/Designer Note: |
The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic imagesand renderings are generic and may not represent exact construction details for each collection. The exact specificationsforthis collection can be found in theconstruction detailslisted above. |
